top of page

lmiC TYPE-C RED STEADY   

The LEDEOMIC is a medium intensity light with multi-LEDs technology, developed with an aluminium design for a natural fresh cooling system. Dedicated to a night beaconing, it is a long life system (100000 hours), very strong with a low consumption (<50w). The LED EOMIC is provided with a photocell for an automatic switch ON / OFF, and a dry contact for failure alarm. Moreover, it can be solar power supplied. It has been designed for an easy installation.

​

APPLICATIONS:

​

Rules concerning aircraft beaconing are established by the ICAO (Annex 14, Chapter 6). Medium Intensity lights can be installed on structures from 45 to 150 meters tall, with an intermediary level of marking. According to the rules, an uninterruptible power supply cabinet has to be installed to assure 12 hours of beaconing in case of power supply failure.

  • Building

  • REGULATIONS

  • Stack

​

ADVANTAGES:

  • Long life time > 10 years

  • Multi-LEDs

  • Low consumption <50W

  • Delta Box exclusive self-test included with photocell

  • No maintenance

  • 2 years warranty

  • Zamac box with epoxy powder painting

  • IP66

​

LMIC-Type-C-Red-Steady-Burningb.pdf - Ad
LMIC-Type-C-Red-Steady-Burningb_edited.p

SF4 AVIATION LIGHT   

IMG_25601-768x1024_edited.jpg

Fixed obstacles (temporary or permanent) in areas subject to aeronautical easements, and which are deemed to be a danger to air navigation, must be identified by markings.

​

TARGET has used its experience with construction cranes to develop equipment specifically adapted to mark up cranes in terms of adaptability, operation and autonomy.

​

 The SF4, light obstruction lighting system, designed by AGS allows the school head to respect the obligations dictated by the Decree of December 7, 2010, relating to the achievement of the marking of obstacles to air navigation.

​

The SF4, night light beaconing consists as standard of the components necessary for beaconing a crane:

  • Three FX4 red LED obstacle lights designed to be installed at the ends of the crane: boom, counter-boom and center of the crane.

  • A power supply cabinet with energy reserve

  • The assembly is completed by the lamp / cabinet connection cables and by the fixing and support parts.

 

SF4 is made up of the following main elements:

       3 x AGS FX4 LED obstacle lights, for night and dusk

  • Red color

  • Low Intensity Category, Type A> 10 cd for 2 ° to 10 ° site

  • Certificate of conformity STAC 2014A015.

  • Low consumption (3W),

  • Multi-voltage: 24 VDC, 230 VAC

  • Fastening system adapted to the structure of the cranes 1 x Power supply cabinet with energy reserve

  • Preset twilight switch

  • Switching to the battery in the event of a network failure <1s

  • Autonomy 36 hours, an average of more than 3 nights

  • Daytime running test by light ignition cycles

  • Lithium battery

  • Connected technology: alarm transmission by SMS or email (optional)

  • Dimension and reduced weight: L 220 x h 220 x D 150 mm Weight 5 Kg
     

STRONG POINTS :

  • Complete beaconing system adapted to the crane

  • Dimensions and minimum weight

  • Lithium battery:

  • Exceptional weight / autonomy ratio

  • Long service life: + 2000 charge / discharge cycles

  • Reduced recharge time

  • Excellent low temperature performance

implant-sf4-886x1024.jpg
bottom of page